MTM Medium Speed Mill

Documents Download

MTM Medium Speed Mill

Sales Hotline:

Tel：0086-21-58386256 0086-21-58386258
Fax：0086-21-58385887
Yahoo Messenger：zenithcrusher@yahoo.com
E-mail：info@zenithcrusher.com

features
technical data
Pictures
Introduction
customer sites
video show

MTM mill Technical Advantage:

1. Effective grinding effect.
2. Outstanding spring structure.
3. High capacity.
4. Low energy consumption.
5. Convenient to adjust the fineness

MTM mill work principle

The host drive the central axis of rotation through reducer, the upper of drive shaft connecting the plum frame, on the frame have roller devices and form a swing pivot. Not only roller device rotating around the central axis, but also around the grinding ring revolution, roller itself is a result of friction and rotation. Under the plum frame equipped with a shovel knife system, its location is in the lower roller, shovel blade and the roller take the materials into the grinding ring between revolution, the material layer will be crushed materials by the outward centrifugal force generated by grinding rollers rotate (ie, extrusion pressure), and then to achieve the purpose of grind powder.

Vertical roller mill Technical Data:

Model		LM130K	LM150K	LM170K	LM190K	LM220K	LM240K
Turnplate diameter (mm)		1300	1500	1700	1900	2200	2400
Capacity (t/h)		10~30	13~40	18~57	23~72	36~114	41~128
Final product size	μm	170~45	170~45	170~45	170~45	170~45	170~45
Final product size	mesh	80~325	80~325	80~325	80~325	80~325	80~325
Final product water percentage		≤1%	≤1%	≤1%	≤1%	≤1%	≤1%
Max. input size (mm)		<38	<40	<42	<45	<50	<55
Best water percentage of raw material		<4%	<4%	<4%	<4%	<4%	<4%
Drying needed if water percentage is more than		<15%	<15%	<15%	<15%	<15%	<15%
Input wind temperature (℃)		<350	<350	<350	<350	<350	<350
Output wind temperature (℃)		70~95	70~95	70~95	70~95	70~95	70~95
Main motor power (KW)		185~220	250~280	355~400	450~500	710~800	800~900
Overall dimension	L mm	3500	4200	4700	8500	10200	11700
	W mm	3400	3900	4500	5600	6700	7700
	H mm	5800	7100	8300	8800	10600	12200
Weight (t)		48	75	90	100	125	160

Note: 1. Input material should be brittle material with Mohs hardness not more than seven.
2. Hot air is needed only when there is a requirement that water percentage of final product should be less than raw material.
3. If the material is hard to grind, motor power take large value.

Vertical roller mill Specification

Model		LM130M	LM150M	LM170M	LM190M	LM220M	LM240M
Turnplate diameter (mm)		1300	1500	1700	1900	2200	2400
Capacity (t/h)		10~15	16~22	20~28	26~35	35~45	40~50
Coal powder fineness (R0.08)		<15%	<15%	<15%	<15%	<15%	<15%
Coal powder water percentage		<1%	<1%	<1%	<1%	<1%	<1%
Max. input size (mm)		<38	<40	<42	<45	<50	<55
Input material water percentage		<15%	<15%	<15%	<15%	<15%	<15%
Input wind temperature (℃)		<350	<350	<350	<350	<350	<350
Output wind temperature (℃)		75~95	75~95	75~95	75~95	75~95	75~95
Raw coal Hardgrove grindability index (HGI)		>55	>55	>55	>55	>55	>55
Main motor power (KW)		185	250	315	400	500	560
Overall dimension	L mm	3500	4200	4700	8500	10200	11700
	W mm	3400	3900	4500	5600	6700	7700
	H mm	5800	7100	8300	8800	10600	12200
Weight (t)		46	75	94	100	122	157